ProBoat BlackJack Twin Build

[mtbenjamin77]

Well, the 1515's are far superior. What I showed was a nice batch of newer tenshock motors with various KV's.

Where did you pick them up at cost?

A friend who's a sponsored driver and didn't need them anymore

[mtbenjamin77]

I've always wanted to try the tenshock motors, those and the ARC motors. I've heard good things about both

[Brushless55]

Cool motors 40 x 68mm

thanks for the post!
I was looking at a 40x73.5mm 2200kv version
6 pole, could wack a Castle 1515 2200kv in the butt

[ray schrauwen]

That would need testing. They are nice but, wait until they have a better sale.

There are some nice N2 wind motors for sale their too. Just not proven in a boat.

thanks for the post!
I was looking at a 40x73.5mm 2200kv version
6 pole, could wack a Castle 1515 2200kv in the butt

[ray schrauwen]

Better off with ARC motors, far better wire & magnets. More $$ too.
These are very solid motors but, only 1900kv

I've always wanted to try the tenshock motors, those and the ARC motors. I've heard good things about both

[Brushless55]

That would need testing. They are nice but, wait until they have a better sale.

There are some nice N2 wind motors for sale their too. Just not proven in a boat.

better sale?
I thought $109 was good...

[ray schrauwen]

Yes but, I've seen that place drop some crazy sale prices. I'm just not familiar with the motor thats all. I can make coolers for them too. I buy 2" OD Alum. tube that has an ID of 1.75". I just lathe the outside to make them lighter and pretty. At least they fit the 40x68Tenshock/Trackstar 2560kv 6 pole motor from HK.

I just received an email from NEUTRONICS and they have a 25% off March sale. That's cool.

[Brushless55]

Yes but, I've seen that place drop some crazy sale prices. I'm just not familiar with the motor thats all. I can make coolers for them too. I buy 2" OD Alum. tube that has an ID of 1.75". I just lathe the outside to make them lighter and pretty. At least they fit the 40x68Tenshock/Trackstar 2560kv 6 pole motor from HK.

I just received an email from NEUTRONICS and they have a 25% off March sale. That's cool.

I will keep my eyes open for that sale

[Brushless55]

That would need testing. They are nice but, wait until they have a better sale.

There are some nice N2 wind motors for sale their too. Just not proven in a boat.

better sale?
I thought $109 was good...

Yes but, I've seen that place drop some crazy sale prices. I'm just not familiar with the motor thats all. I can make coolers for them too. I buy 2" OD Alum. tube that has an ID of 1.75". I just lathe the outside to make them lighter and pretty. At least they fit the 40x68Tenshock/Trackstar 2560kv 6 pole motor from HK.

I just received an email from NEUTRONICS and they have a 25% off March sale. That's cool.

Bro, I waited and it looks like the prices have gone up?

[olwarbirds]

Thanks for the compliments, I'm prolly not gonna use the 1515's just too much. It was a fun thought though. I have other build I can use the 1515's on. I'll prolly go with some leo 3665's or similar

We are running a PB BJ29 with the leo 4082 2000KV with a seaking 180amp esc with cap bank on 6S and im impressed !!...I plan on using some more of those leopard motors...Im also gonna be running a tenshock in my H&M boatworks M1 supercat...lots of new nice motors showing up now for us FE boat addicts to try out :) .... DJ

[kendt]

I've always wanted to try the tenshock motors, those and the ARC motors. I've heard good things about both

These look an awefull lot like a re branded arc to me>
http://www.hobbyking.com/hobbyking/s...ion_29mm_.html

[ray schrauwen]

Hard to tell Kent but, if you can find the parent web site for the Chinese company that makes ARC motors, they have a chart of what they make.

You will know they are very close if the wire is unusually thick gauge for an inrunner compared to a Leo, TP, or Neu.

Guinea pig time???

[ray schrauwen]

Here they are: ARC HOME

[Make-a-Wake]

I'll suggest a couple of these for 4s running, heck, just one of these would have been a healthy upgrade from stock. Two of these 4 polers will still make it scream.

http://hobbyking.com/hobbyking/store..._Inrunner.html

Those mad thrust 4 pole motors Kendt linked would be great too......... 28x60's are still a big upgrade in power.

[kendt]

I used one of those turnigy IR's in a 4074. It was a great motor for the money but I eventually over propped it and it went up in smoke. The holes in the fron end of the dr. Mad thrust motors are what makes me think they are arcs.