B55 OM29 repaint !!

[Southwest]

Does the UL-1 do a better job than the 3674-b-2200 for power. I run a 442 oct. and what is your weight ( boat )? Thanks!

[Brushless55]

Congrats! Man!
Trophy looks good with the boat!

Thank you!

Gotta do a scuff with new paint.

that is next on the list to do with this hull

Does the UL-1 do a better job than the 3674-b-2200 for power. I run a 442 oct. and what is your weight ( boat )? Thanks!

I race PSpec and took second with this boat, so I have to run a Spec motor
as for weight I'm not sure but its not much because this hull is Carbon Fiber

[JimClark]

Lets bring this back up to the top.
Todd how did this paint job stand up to hatch tape?

[Brushless55]

it is doing amazing Jim !

I've not had any issues with tape pulling up any clear on this boat or any others where I use Rust-Oleum Crystal Clear Enamel
I think the trick was letting it back in the sun for a couple of hours to fully cure

[JimClark]

Thanks for the help Todd

[Tamelesstgr]

Nice job, this is encouraging as I will be undertaking this process on my son's Shockwave 26 shortly. Must remember to be patient and let each layer cure completely.

[Brushless55]

Nice job, this is encouraging as I will be undertaking this process on my son's Shockwave 26 shortly. Must remember to be patient and let each layer cure completely.

I was amazed at how well the clear came out when I let it set in the sun for a few hours
I'm doing this clear with more of my boats, and they look really good

[RandyatBBY]

Try 120 wet and dry grit sand paper.