MHZ Mystic M 1140mm build
Collapse
X
-
There's nothing more heart wrenching that watching a boat disappear from life.
The obituaries usually read.. lost range ..lost sight ... props too big.. blow over.. cg wrong .. ducks dont dive! ... R.I.Pieces ...
Take as much time setting up as you do building, and they'll be pride of place in your collection for ages.
Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it
YOUTUBE
@ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @
Comment
-
"Take as much time setting up as you do building, and they'll be pride of place in your collection for ages."
Well stated Sir. Those words of wisdom can be applied to more than boat builds.
They call me DOUBLE D
Comment
-
Hello, today it looked much better but only took 2 sec. To roll the boat
I don't feal so bad it was a day for rolling boats, here's DocW rolling his
Last edited by nata2run; 03-04-2012, 05:51 AM.Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
Comment
-
Kent's stumbled due the rough water. it rolled over a wave !
gps said 95kph
mine a case of too fast into the wind..it 'flew' across a wave trough @30ft before it landed nose down ... last few secs of vid !
Last edited by drwayne; 03-04-2012, 06:31 AM.Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it
YOUTUBE
@ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @
Comment
-
Hey, still a fun day, and no damage done. If this is the worse that will ever happen I'll be very happy.Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
Comment
-
We waited 10mins while mine 'sailed' back.. both thought the other had rescue gear !!! :shame:Originally posted by nata2run View PostHey, still a fun day, and no damage done. If this is the worse that will ever happen I'll be very happy.
SC40 suffered dribbly bum syndrome.. but all's well after a moment in the sun ( summer here atm ).. ready to go again.
next time we go I need convince Kent to drive his himself.. !
Ta for a fun day !
WWayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it
YOUTUBE
@ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @
Comment
-
No convincing needed hehe, I'll be fine. I bet I can flip it myself LOL maybe a rescue boat next timeVisit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
Comment
-
Hehe, good point I did build it! but here is the deal, I had it out the first time and things went well before I lost the shaft, I took it slow so no harm done. I am very new to electric boats, and handling them. one thing is to build, the other is setup and control. 80km/h worked for me on other boats, but now it's 100km/h, next will be 140km/h "I fly helli's so I'm use to that" with motors twice the power of what was installed (Leo's) i didnt know what to expect, so only safe thing is to leave to someone who knows what they are doing. (Just to get the ok green light) Now I have a better understanding, and a bit more respect of what I'm dealing with. 12hp = 3x lawn movers in one boat. LOOK OUT!Originally posted by cyprus31 View PostKent
You builted this beauty and you did not give it a try yet? And if it flips so what? This is what makes our hobby so exciting!!!
A rescue boat by the side next time will wind you up. I am sure about this.
Anyway....have fun guys
Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
Comment
-
on build table nowOriginally posted by nata2run View PostNo convincing needed hehe, I'll be fine. I bet I can flip it myself LOL maybe a rescue boat next time
definitely a self righting hull !
jet drive or prop ?
hmmmmm
stay tuned !Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it
YOUTUBE
@ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @
Comment
-
Like Apple "sorry", I don't like to blow my storry, but rumour has it that it will be steam powered? no official release date at this point LOL.....Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
Comment
-
Steam would be too quick, mate ... Id prefer electrons.Originally posted by nata2run View PostLike Apple "sorry", I don't like to blow my storry, but rumour has it that it will be steam powered? no official release date at this point LOL.....
Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it
YOUTUBE
@ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @
Comment
-
LOL My point ...electrics are old technology... bring in the H2O powered "machines", Auto COG correction, titanium on the fly adjustable pitching self sharpening props. 300 mph capable, the list goes on LOL. Here we are stuck in the century with the boat upside down LOL....Originally posted by drwayne View PostSteam would be too quick, mate ... Id prefer electrons.
http://www.youtube.com/watch?v=hVN8i...eature=relatedVisit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"
Comment
Comment