JPriami’s Carbon Fiber 37” Daytona/Genesis Build

[JPriami]

37" Daytona Cat Hull - CF LE
Got my bare carbon fiber hull today from FighterCat. Looks great! So Im going to start slowly gathering up all of what I need to build this one. Its going to be a twin setup.

[LarrysDrifter]

She looks stealthy. Hurry up and get it done!!!

[LarrysDrifter]

She looks stealthy. Hurry up and get it done!!!

[RIPFENCE]

great justin i have been hoping the thread would be up soon like we talked about!! i will be watching to see if i can get any good ideas from you also..stealthy for sure

[JPriami]

Going to get some PVC and make a stand tomorrow I hope. Making list of some of what I know I need. Still figuring out what motors I will use then the escs & batteries. Figuring up the weight of it all by looking up specs etc.

I may get some vinyl graphics to cover parts of the boat to have some bright colors on it. Will make it easier to see since I plan on having it moving pretty fast.
Ive got the diamond plate fightercat decals to put on it too.

[fatboyelectric]

Nice looking hull, any word on how these perform on hot single motor applications?

[keithbradley]

These CF versions are so hot! I'm in for this one!

[dano1]

dam, that thing is sick looking, awesome looking boat.....second the motion...get r done!!!!!!!

[JPriami]

Ive been looking up specs of stuff and trying to figure out what direction I want to go to power it.
Looking like I will do the following..based on my figuring
Twin brushless outrunners 3740 1760Kv
Specs of H3740/2 KV1760 as below:
Class：600/700
KV：1760
Poles: 8
Max Power：3kw
Weight(g)：390
Idle current/10V：6.30
Max Lipo：11s
Shaft diameter：6mm
Measurement (mm)：￠44.3*65

Other twin motors (hyperions) I plan on testing in this are listed below a few post

I will be able to run from 4S-8S I dont care to go over 8S on this.
ESC's to be determined--swordfish 240?
Hyperions G3 EX 45C or Nano tech 45C 5000mAh packs in various configs depending on what I am wanting to run that day

fightercat 110mm stingers--on order
rudder to be determined
pickups to be determined-- but i have some in hull ones i may use.
fightercat motor mounts

[Jedi Master]

Look forward to seeing this progress!

[BruLSU]

Sweet! I have the same hull sitting at the house with the diamond plate decals. I will be starting my build soon. Waiting for FC to ship me those same outrunners... the 3740's and the 110mm stingers!! I've got 2- T-180's at the house, I'll prob. start off running those. Def. will be watching this build!! Keep us posted!!

[JPriami]

im gonna need something that can do 4-10s for an esc. not looking to run 10s. but same principal as the motor. it can do 11S but i want to keep it safe at 8s.

[6sHyper]

that is one sweet looking boat!!! wonder if there gonna offer them in the 32" in the near future?

[JPriami]

Go over to fightercatracing.com and talk to Benjamin. Hes a great guy. Tell him I sent ya

[JPriami]

Looking like I will have to buy 2 swordfish 240 ESC's to do the broad range of lipo cells I want for this project. If anyone has any insight to a better option let me know.
Im wanting to have an esc that will do over 150amps, and 4-10+ lipo cells. But it cant cost more than the swordfish 240 at $260ea because so far thats the best price I can find.