33" mono copy/clone

[LarrysDrifter]

Ok,thanks.Appreciate it.

[carlcisneros]

Larry;
here ya go

https://www.sunrisemodel.com

Carl

[Alexgar]

manual

heres the manual from fighter i bought one to

[carlcisneros]

other programming from suppo

here are a couple other programmings for the 200A suppo esc.
they can never make up their minds and let folks know what VERSION they have.

I have sent the atatached additional programming sequences to Ben and he should also still have them.

hope this works.

Carl
if you have any problems programming them let me know.

also use a 3S pack in programming them., they tend to get very hot if you use a large-ish pack. I have popped one using a 6s pack before. go figure. LOL

[LarrysDrifter]

Thanks,Carl.Sorry to crap your thread Scott.

[forescott]

No worries, all good info to have.

[forescott]

Finally received my turnigy outrunner from hobbyking and got some time to work on the boat. Installed motor/collet/motor mount. Cut flex to length and epoxied the stuffing tube in place. Started routing the cooling and installed the water outlet. Cut a couple pieces of thin aluminum stock and glassed them into the hatch to help keep the lid on. Also got the steering linkage hooked up and installed a thin piece of ply. between the rails to that doubles as a battery tray and a base for the servo mount. Almost done!!

[LarrysDrifter]

Nice to see its coming along.You going to post a video too?

[Punisher 67]

Jeez that boat is coming along very nicely and fast Scott . Awesome job so far......