40 inch offshore

[TotalPackage]

yeah that looks like a cool hull, where did you get it?? I have a new 1520 that would probably work pretty good in one, and i'm looking to build something similar...................

I got it for an old fox 40 nitro airplane motor
I got the airplane motor from my cousin he gave it to me
so basically it was free.

[TotalPackage]

Got video today but my transmitter went dead so it cut the run shortrt. Im really surprised the t600 turned that k57 with no real issues .It came back to life after I cut the video of course and i putted it in. When i checked everything it was in great shape.The esc was barely warm and i could hold thet600 in my hand as long as i wanted too . It was warm but no where near hot.

Check it out and give me some feedback. What do I need to do?

http://www.youtube.com/watch?v=_6q50d_DpZA

[ray schrauwen]

Go to a bigger pond!

[TotalPackage]

dang ray you ruff on a brother
Man i like my droid x 720p videos are so cool take a long azz time to upload to you tube tho.

[TotalPackage]

I cant paint it until i go to brands of the world and find this classic logo for now its a secret.

[TotalPackage]

The esc is only 100 amp so I gotta make some changes ill just do wat everyone else did and buy a t180 forgetabout it. .

[TotalPackage]

Now all i need is a real motor coz this boats has a long way to go. too slow for me . Little azz motor need to go .Yes i know they would be more effective closer to the esc and straight soldered but i wanted it neat.

[Jacked1]

That is a gigantic prop for that motor! It sounds like your batts are what is holding the speed back. With 6s 40c 5000mah batts in a cat and a 51mm prop everything is pretty hot and up around 55mph with my t600 motors.

[TotalPackage]

o yes the batts are at their limits most def Today ill run it again with the k51 .Thanks for the support Jacked1. im gonna go run it in a few. Camera men are hard to find tho. That was my nephew in the last video.

[TotalPackage]

But im going to the big lake today so i can see before i pass to many judgements on top end but i want her quicker out the hole .

[Jacked1]

Sounds good! I ruined some 3300mah 30c cells trying to pull 120 amps from them in a big mono.

For more speed you could just get another set of what you already have and make it a twin and it would be cheeper than buying a new bigger motor and esc.

[TotalPackage]

yeah they good for barely over 100 amps .I got enough for 2 p tho. But I dont want to be pulling 120 on this motor. In the end Jacked face it what I want is gonna cost more than 29 bucks if you want to do anything more than just have a little fun. If you want some braggin rights you gotta spend some paypa dont sweat it i got some goodies on the way.

[TotalPackage]

Hey jacked, is this stout enough for you? 6000 mah 35c thats double what I expect in an eff. setup.No lets go run it

[TotalPackage]

Im back and Im uploading .................................................. ...

she ran great

[TotalPackage]

Predictions? I need more power