Just got done fitting all the gear. Got the hull used here on the swap shop. Running 4s2p Turnigy's, 8xl, and seaking 180 on a m445 prop. I think she's gonna fly!!
-
-
Ran the pickle toda. Went with the stock plastic ul-1 prop. Around 440/3. Took a bit to get on plane, but once she did... look out!! This think absolutely rips with an 8xl!! It handles about 200 percent better than a ul-1! Stays nice and stable crossing it's own wake, and flies through corners with very minimal sponson lift. Running a ul-1 turn fin as well. gonna run a x440 next. maybe i can squeeze in the Etrex and get the wifey to film one for me!Last edited by Rumdog; 02-08-2010, 09:20 PM. -
Cool!Comment
-
wheres the video!!
man , i almost snagged this... good buy!!
Comment
-
I do like this hull . It is much more rigid than I thought it would be, being abs. So far, I am very impressed with how she handles. It does have some light ply ride pads the original owner must have installed as well. I dig my new Turnigy's too! Running 4s2p. They are 4s 2650 mah and 40c! A lil bigger than a 2s 5000mah pack.Comment
-
ive got all of the above lipos and run my maritimo with those batts! love em!!!Comment
Comment