Liftmaster 4s BBY Rigger

[tth]

I will start off saying that this is by far the best craftsmanship I have ever seen on any model boat. I can appreciate the time and effort that it takes to hand make boats like this.Check out the custom hardware on the transom. Hats off to you Randy.

I purchased the boat here on OSE swap shop for a great deal. For those of you that have not seen it yet here she is:

[tth]

Some interior pics. I'm happy to say that all the hard work was already done. The ESC is a Hydra 240 lv, check out the cap bank made for this build.It is soon to have a Neu 1527 1.5D on 4s2p to start with. She will ultimately end up with 6s power. I will need to check with Randy about getting some saw sponsons but these will do for now for some ovals.

[wakeboardfusion]

Nice Lookin rigger there!

[RandyatBBY]

I have not driven one of these yet, Sounds bad But as Wilmer says I do it right and it has always worked for him. If not send it back to me, I will drive it and make it right.
Thank you for the praised. I really try hard to make all happy. Hope you have a lot of fun.

[tth]

Eric: Thanks, I can only say I bought the right boat.


Randy: Brother I wish I could come out to CA and run the boats with you. That way you could say that you drove one. Many thanks for your contributions to our hobby.

[Rumdog]

Beautiful! That sukka's gonna rip with a 1527!!

[j.m.]

I like the skinnier tub, looks better IMO.

[RandyatBBY]

I will need to check with Randy about getting some saw sponsons but these will do for now for some ovals.

Remember that when you want the SAW Sponsons the boat will need to be sent it to be fitted. I have not figured out a way to build a gig for the SAW sponsons yet. There is rough locating martk in the mold for the sponsons, but not exact.

[tth]

Remember that when you want the SAW Sponsons the boat will need to be sent it to be fitted. I have not figured out a way to build a gig for the SAW sponsons yet. There is rough locating martk in the mold for the sponsons, but not exact.

Thanks for the heads up....I'll be in touch soon.

[T.C.]

Is that a cooling line pluged into the stuffing box?
T.C.

[tth]

Yes it is a watercooled driveline.

[RandyatBBY]

Yes it is a watercooled driveline.

The inlet closes to the motor is a oil leach system, the center one is the water out let and the rear is the inlet