I have a HPR 06 in the shop to build. I need the CG to get started. after it got hear I could not sleep for about 20 hours. cool boat!
-
-
Randy, what motors are going in? Are you making your own mounts? Did you get the scale arneson drives and scale rudder together with the hull? Sorry for all the questions. But I have one built (glass only) and have another (carbon/kevlar) waiting to be built.HPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:
-
This one will have 1527 .5Y's. Yes we did get the scale Arnesons and the rudder with it I am desiging the motor Mounts they will be the same as the SC33, eazy to get in and out and out of sheet metal .125 aluminum. This one os the Kevlar Carbon. I am goijng to pitch the crap out of two props for this boatOriginally posted by westbeach View PostComment
-
Cool Randy, can't wait to see you build this cat!
HPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:Comment
-
Hear is it next to my SC33Originally posted by westbeach View PostCool Randy, can't wait to see you build this cat!
Comment
-
Looking forward to see the build by an experienced boater like Randy......
Good luck.
JCLast edited by JCAustralia; 01-07-2010, 11:13 PM.Comment
-
Still need the CG for this boat.Comment
-
'according to Hanspeter is 31.5cm'
'puts the bulkhead for the motors at around 9.8cm from the rear flange of the top cover opening.'
although the motor mounts i think feel best in the step about 11 - 13cm away? i don't know if this is right because at 9,8cm the mounts push the deck so will require sanding...Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holderComment
-
I start at 34% for cats but If there are guys willing to give you an exact measurement, I would go for that...HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
-
Thanks for saving me some time, It is something I do not have much of. I would love ro read all the post but there is just not enough time in the day. Again thanks! And that goes for every one else too!Originally posted by malibu1 View PostComment
-
I am going to get back to this build, Steve got me the motors and will be in the mail soon.Comment
Comment