32'' cata build HOTR

[Alfa Spirit]

Here' s the right position ( from HM ) to obtain the best position for a XL motor in the Agitator hull

[Jeff Wohlt]

Just now make sure your hatch will go on. Mine had to move to the rear more to fit the bubble.

[Steven Vaccaro]

You can also add small wooden blocks under the fiberglass piece to elevate the motor mount a bit. Than add a piece of fiberglass cloth to keep it all in place.

[elvish]

Hello,
First off, the good news, my esc will be replaced...

Second I started the whole strut rudder installation,

procat20.jpg
procat21.jpg
procat22.jpg
procat23.jpg
procat24.jpg

will add some more later

[screwball]

that is one clean looking installation!!!!

[elvish]

Some carbon reinforcements on the back

procat25.jpg


And some in the middle

procat26.jpg
procat27.jpg

Of course everything is going to be sanded and evened out , so the finishing look will be almost perfect