bby om29 build

[steveo]

oops heres the photos

[ace028]

looks nice, how does she run? Looks like you got your trim tabs upside down, the sheet metal part follows the same shape as the aluminum, so it makes a L not a U if you know what I mean, then you will have more adjustibility from the supplied screws.

[kck741]

Or you could put longer screws in it ...???

my 0.02

[ace028]

Or you could put longer screws in it ...???

my 0.02

That is defiantly true

[steveo]

your right, they are up side down i was in a hurry pulling them off another boat, i knew something didnt seem right

[steveo]

i have not tested with the new fins and tabs, #1 my charger dosent work #2 i need a good boat esc

with in the next month i will have an esc , new charger and getting lipos, thats my goal

[steveo]

ok since this last post i got my ebay etti 125 amp esc (great speedo), 2 2s1p tp 5000
and astro charger, i was having trouble getting it dialed in i thought it was the fdm strut was to deep so i got a fuller adj strut and still had issues, turns out i had the cg wrong, i put the batt alot farther back it was just right it ran true with no bobble just enough out of the water to be fast and stable

i did have a blow over it was getting really choppy and i was against the wind, boat handled the waves with ease

forgot the gps, temps were cool both esc and motor the batts were rather warn because of the long run, prop was a x642, i'll use a x645 to race with