Thanks all to the previous advice on my prop it was very helpful!
Im back again needing some more help. This time its not much of a problem , but would like to get my motor temp down. This is what Ive done so far to my boat. I replaced the cooling lines going from the motor to the esc because from the factory they were kinked. I now have a nice stream of water from the outlet while running the boat so the cooling system is getting plenty of water. The esc runs nice and cool and has given me no problems. The outrunner motor has also given me no problems , but it runs pretty hot (sorry no temp gauge reading) to the touch. The cooling system for the mtor looks kinda cheasy in my opinion , its just one small pipe on the top of the motor mount and one on the bottom, both are zip tied into place. I would like some ideas on how I possibly could get a little better cooling here and bring down those motor temps a bit , I stayed with the stock prop as it seems to give me good performance , but I would eventually like to upgrade that as well for durability , not going for higher performance as I like the overall feel of the boat right now.
Any advice on the cooling though would be nice , without having to replace that motor
Im back again needing some more help. This time its not much of a problem , but would like to get my motor temp down. This is what Ive done so far to my boat. I replaced the cooling lines going from the motor to the esc because from the factory they were kinked. I now have a nice stream of water from the outlet while running the boat so the cooling system is getting plenty of water. The esc runs nice and cool and has given me no problems. The outrunner motor has also given me no problems , but it runs pretty hot (sorry no temp gauge reading) to the touch. The cooling system for the mtor looks kinda cheasy in my opinion , its just one small pipe on the top of the motor mount and one on the bottom, both are zip tied into place. I would like some ideas on how I possibly could get a little better cooling here and bring down those motor temps a bit , I stayed with the stock prop as it seems to give me good performance , but I would eventually like to upgrade that as well for durability , not going for higher performance as I like the overall feel of the boat right now.
Any advice on the cooling though would be nice , without having to replace that motor