Best set-up for a Pursuit Mono

[simo71]

Resin or Epoxy is your freind, & it is of course easier to do it before heading off to the wet stuff.

I will let you know how I go.

[Diesel6401]

I have one of these in white, very nice hull & hardware. I lost the 1620kv & the ESC & have put in a 180 seaking & the Turnigy 500 typhoon outrunner, this is a 6 pole motor & has a good amount of torque & will be using a x445 to start with.

Yet to hit the water with it, but will be doing so this weekend.

Let us know how that works out for you.

My mate has one with a KB45 1600 kv on 5s with a Turnigy 180, She flies.. A bit loose but for the price very good. Look into strenghtening the motor mount, battery tray and stuffing tube as they usualy come weak or loose.

I heard about weak motor mounts, trays etc... Seems to be common with the cheaper boats

[Mick..BJ26..BL]

My mate has one with a KB45 1600 kv on 5s with a Turnigy 180, She flies.. A bit loose but for the price very good. Look into strenghtening the motor mount, battery tray and stuffing tube as they usualy come weak or loose.

[simo71]

I have one of these in white, very nice hull & hardware. I lost the 1620kv & the ESC & have put in a 180 seaking & the Turnigy 500 typhoon outrunner, this is a 6 pole motor & has a good amount of torque & will be using a x445 to start with.

Yet to hit the water with it, but will be doing so this weekend.

[Diesel6401]

I suggest ordering these from someone close. They all have some sort of problem.
Out of the 3 monos I have. All had some sort of issue. Nothing that couldn't be worked out, but some things may not be acceptable. Like spider-ed paint I found on one the other day.

Thanks for the heads up Steve.

[Steven Vaccaro]

I suggest ordering these from someone close. They all have some sort of problem.
Out of the 3 monos I have. All had some sort of issue. Nothing that couldn't be worked out, but some things may not be acceptable. Like spider-ed paint I found on one the other day.

[Diesel6401]

Personally, I'd order it from Jan at Kintecracing.com. Sure, it's a few $ more, but it's got a 540XL sized motor and is in stock, whereas the Pursuit from HK is backordered and has a 540L.

[Diesel6401]

Most likely that one, but Kintec has it for $290.
Head of the River has it for $270.

I ALWAYS try to order as much as I can from Jan or Steve, personnel preference. Those guys have great business's and are great to deal with. I email Jan a few times a month just to BS and he always responds and answer my questions reguardless how stupid my questions they may be. Certain people I try to support no matter what reguardless of cost, and OSE & Kintec are 2 of them!

[skellyo]

I hope you mean this one.
Just want to be clear :)

Personally, I'd order it from Jan at Kintecracing.com. Sure, it's a few $ more, but it's got a 540XL sized motor and is in stock, whereas the Pursuit from HK is backordered and has a 540L.

[liquidgenesis]

Most likely that one, but Kintec has it for $290.
Head of the River has it for $270.

[Diesel6401]

I hope you mean this one.
Just want to be clear :)

Yup except i am not ordering from HK, I am ordering from Jan at Kintec, same boat though.

[vasy]

I hope you mean this one.
Just want to be clear :)

[Diesel6401]

yes, enough space for 180.
I'd try m445 1st, seems x6 series of props drain battery faster. I get butter runtime on x442 then on x640... and more fun :)

Sweeeet, you answered my questions. Thanks I hope to order this soon.

[vasy]

yes, enough space for 180.
I'd try m445 1st, seems x6 series of props drain battery faster. I get butter runtime on x442 then on x640... and more fun :)

[Diesel6401]

I have Pursuit mono.

Currently run it on 4s, Leopard 4074 2200kv with a Seaking 120. Tried x440, x640, x442 and x445. Runs well with x442 and better with x445.

Thanks so much. I have a leopard 4074, will a seaking 180 fit in the hull? I have a m445 and x642. Maybe 1 of those will work.