Just took delivery of HK NTN-600 brushlesss

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • FighterCat57
    replied
    Originally posted by jamespl View Post
    Can anyone recomend a decent budget motor upgrade for this boat to run on a 4s lipo without changing the motor mount? Do you think it would be as fast as my blacjack 26 on 3s with that motor?
    I can say these are great motors!


    They bolt in to the 380 and 540 mounts. They run well on 4s with smaller props IME. They also run well on 60a esc's.

    I've seen quite a few other 540 sized motors with the diamond shaped bolt pattern and built in water jacket on eBay and Swanghobby as well as others. I have heard problems with some of them though, so be cautious about quality.

    Neu has a 14 series that's supposed to rock and OSE has some XL series Feigao motors that have a good reputation here.
    http://www.offshoreelectrics.com/pro...380-xL&cat=116

    Leave a comment:


  • jamespl
    replied
    Can anyone recomend a decent budget motor upgrade for this boat to run on a 4s lipo without changing the motor mount? Do you think it would be as fast as my blacjack 26 on 3s with that motor?

    Leave a comment:


  • Alexgar
    replied
    8 or 9 xl 36 mm on 4s, or thats what i think

    available every day at lhs

    Leave a comment:


  • Alexgar
    replied
    i run 9l in that size boat with 3s on a pb stock prop wicked fast

    Leave a comment:


  • vasy
    replied
    Originally posted by Alexgar View Post
    my bad 217 again but the motor is the same?????
    no,
    small:
    Motor: 20-40 size 2604kv Watercooled brusless
    ESC: 30A watercooled

    Big:
    Motor: 28-58 size 2881kv Watercooled brusless
    ESC: 50A watercooled

    Actually the "big" power should be on the small boat and the "big" boat needs bigger motor.

    Leave a comment:


  • Alexgar
    replied
    needs l or xl power for sure 36mm

    Leave a comment:


  • Alexgar
    replied
    my bad 217 again but the motor is the same?????

    Leave a comment:


  • vasy
    replied
    Originally posted by Alexgar View Post
    wtf just logged in to hk and boat is listed at 140.97
    Wrong boat, it is the 425mm, not the 625. They look the same, just different size.

    Leave a comment:


  • Alexgar
    replied
    if thats the case i will order again as soon as the 2.4 radios are back in stock

    Leave a comment:


  • Alexgar
    replied
    wtf just logged in to hk and boat is listed at 140.97

    Leave a comment:


  • Alexgar
    replied
    looks good but i would swap the motor before i spent any money on the esc 28mm sounds small for this size xl maybe but a 2800 l sounds better on 4s setup but thats my opion i have a 28 in a mini and its at the top of its limit
    217 for me also 3 orders worth about 250 put me platinun plus posting reviews buys you points
    Last edited by Alexgar; 06-02-2010, 08:16 PM. Reason: spelling

    Leave a comment:


  • skellyo
    replied
    Originally posted by Brushless55 View Post
    does the price per item go even lower when you have Platinum stats?
    On some items, yes. It's especially applicable to a lot of Turnigy branded items.

    Leave a comment:


  • Brushless55
    replied
    Originally posted by video200 View Post
    im platinum. 14 orderds and just under $1000 total from them
    does the price per item go even lower when you have Platinum stats?

    Leave a comment:


  • Brushless55
    replied
    Originally posted by jamespl View Post
    I've got a seaking 60amp esc on the way, do u think the motor will take a 4s lipo?
    you will possibly smoke the motor and esc going 4s on the stock motor

    Leave a comment:


  • Make-a-Wake
    replied
    Originally posted by skellyo View Post
    That makes sense. It does get a bit cheaper once you get to the next level. For instance, I'm a platinum level member now and the boat itself without shipping is $217.00 for me.
    Me too..........$217.

    Very attractive hull! Is the 26" from the nose to the back of the rudder or to the back of the transom?

    Leave a comment:

Working...