So I had done this about 2 months ago, but Shua's post inspired me to share my version of a charger case.
I had been packing my power supply and charger separately in my tool boxes. It quickly filled up with transmitters, batteries, spare parts etc. I also quickly grew tired of taking all the charge leads out, plugging in the balance port extensions, it was like a 5 minute process to set up and then pack up later.
I repurposed a sawzall box since it gave me enough room to do what I wanted. It's pretty slim, has a nice sturdy handle and I was able to cut away some of the plastic inserts. I positioned the charger and power supply and they are held in place with velcro strips.
Now I just place the case near an outlet, open up, hook up and i'm off!!
20150827_214356.jpg
20150827_214401.jpg
20150827_214426.jpg
I had been packing my power supply and charger separately in my tool boxes. It quickly filled up with transmitters, batteries, spare parts etc. I also quickly grew tired of taking all the charge leads out, plugging in the balance port extensions, it was like a 5 minute process to set up and then pack up later.
I repurposed a sawzall box since it gave me enough room to do what I wanted. It's pretty slim, has a nice sturdy handle and I was able to cut away some of the plastic inserts. I positioned the charger and power supply and they are held in place with velcro strips.
Now I just place the case near an outlet, open up, hook up and i'm off!!
20150827_214356.jpg
20150827_214401.jpg
20150827_214426.jpg