Scott's ML GP335

[Brushless55]

Check this out - http://www.tppower.com/sort.asp?class_id=4&news=20

awesome, and thanks for the link
I have two of the 4060 motors (4092)
a 2100kv and 2600kv
2100kv in my PMono right now, and thought about trying the 2600kv in my P Sport Hydro

[Scott T]

What is a TP motor?

Check this out - http://www.tppower.com/sort.asp?class_id=4&news=20

[ray schrauwen]

Beautiful build.

It's too bad there are so many wusses in my part of Canada. They all opted out of P-sport hydro in favor of LSH. Oh well, my Whip 20 sits ready on the shelf for the day when FE racing in Southern Ontario makes a revival.

You know, for the $$ THIS MOTOR is worth trying to make a pop tart out of it...

[Brushless55]

No worries, I used a detongued X442 a lot of the time, the motor really screamed with that small-ish prop. It had no problems swinging an M445, but the boat was on the edge...

Andrew, good stuff those TP motors seem pretty good.

Thank you!
now looking to find one of these 1518 2300kv motors

[JohnZ]

What is a TP motor?

[Scott T]

sorry, and not jack your thread..... but...
what prop did you use on your DF33 with the 1518 2300kv motor?
thanks

No worries, I used a detongued X442 a lot of the time, the motor really screamed with that small-ish prop. It had no problems swinging an M445, but the boat was on the edge...

Andrew, good stuff those TP motors seem pretty good.

[Grazacind]

Yep, the kit comes with all frames, sheeting and batten sticks. Very complete. I'm going to start with the Neu 1518/1.5D (2300kV) and see how it goes. It was a powerhouse in my DF33. Another option is a 1521/1.5D.

Hey Paul, I'm sure yours will turn out excellent like the U95. Will have a chat about it on Sunday.

Andrew, your ML looks really nice. What set-up are you running?

Scott I am running a TP4050 2200kv in mine. Once I got the strut sorted the other day it was running much better ie. no more flips. I have a few of them ready for a twin 6s rigger using them. I think it will lunch a few. lol.

[Brushless55]

Yep, the kit comes with all frames, sheeting and batten sticks. Very complete. I'm going to start with the Neu 1518/1.5D (2300kV) and see how it goes. It was a powerhouse in my DF33. Another option is a 1521/1.5D.

Hey Paul, I'm sure yours will turn out excellent like the U95. Will have a chat about it on Sunday.

Andrew, your ML looks really nice. What set-up are you running?

sorry, and not jack your thread..... but...
what prop did you use on your DF33 with the 1518 2300kv motor?
thanks

[Scott T]

I found a couple more pics of the battery tray and one of the completed hull with cowl.

[Scott T]

I've been checking these boats out myself. Is this a complete kit with the sheet wood?
Looks like you've got a Neu in it. Which one?

Yep, the kit comes with all frames, sheeting and batten sticks. Very complete. I'm going to start with the Neu 1518/1.5D (2300kV) and see how it goes. It was a powerhouse in my DF33. Another option is a 1521/1.5D.

Hey Paul, I'm sure yours will turn out excellent like the U95. Will have a chat about it on Sunday.

Andrew, your ML looks really nice. What set-up are you running?

[Grazacind]

Boat is looking great Scott. Mine is really coming together and running well.

Unfortunately can't make it this Sunday.

Cheers
Andrew

[785boats]

Nice one Scott.
It will be good to have another type of hull in the 4s class. I like the GP series.

I'm building up one of the GP400 kits for 6s EB class running. As you said, the laser cutting is excellent. The whole thing goes together like dream.

See you Sunday.
Paul.

[JohnZ]

I've been checking these boats out myself. Is this a complete kit with the sheet wood?
Looks like you've got a Neu in it. Which one?

[Scott T]

I forgot to get a photo of the battery tray straight after installing it, but here it is now. It's a bit hard to see with it all being carbon, but hopefully it looks OK. The sponsons have been joined and the motor and stuffing tube added also.

[Scott T]

I'll be using one of the newer GP cowls. It fits the hull very nicely. The cowl hasn't been fully trimmed at this stage.